Upgrade Your Miata’s Handling: AWR Racing Adjustable Sway Bar End Links

Most adjustable end links force you to disconnect everything, make your adjustment, reinstall, test, and repeat. It's frustrating and time-consuming. AWR Racing's adjustable sway bar end links change that completely. No removal from the sway bar or control arm required. Just loosen both jamb nuts, rotate the adjuster to your desired setting, tighten, and go. The secret? Left and right hand threaded ends—a smart engineering solution that makes real-world tuning actually practical. With a 3.3"-4.0" range, these are the shortest adjustable end links on the market, fitting everything from stock height to aggressive drops. V2 heim joint rod ends deliver smooth, quiet operation. Heat treated chromoly construction with Grade 8 hardware. Black anodized 6061 T6 aluminum body. And a limited lifetime warranty from a family-owned San Diego shop that's been building quality since 1995. Add that last little bit of suspension detail to your ride—and feel the difference every time you turn the wheel.

If you’re searching for an upgrade to enhance your Miata’s performance, AWR Racing’s adjustable sway bar end links are an excellent choice. These end links represent the perfect blend of precision engineering and practical design, built to deliver handling improvements without the complexity that often comes with suspension upgrades.

The Shortest Adjustable End Links on the Market

What sets AWR Racing’s end links apart is the design. These are the shortest adjuster links available on the market, which means better geometry and more precise suspension tuning. But short doesn’t mean complicated, quite the opposite.

Tool-Free Adjustment That Actually Works

Here’s where these end links shine: no removal from the sway bar or control arm is required to make adjustments. Let that sink in. Most adjustable end links force you to disconnect everything, make your adjustment, reinstall, test, and repeat. It’s frustrating and time-consuming.

With AWR’s design, adjustment is genuinely simple:

  1. Loosen both jamb nuts
  2. Rotate the adjuster until you reach your desired setting (free-wheeling or pre-loading)
  3. Tighten the jamb nuts
  4. Hit the road

The secret is the left and right hand threaded ends. A solution that makes real-world tuning actually practical.

Versatile Fitment for Every Build

Whether you’re running stock ride height or you’ve lowered your Miata on coilovers, these end links have you covered. With a length range of 3.3″-4.0″ (84mm-101mm), they’re suitable for all types of builds and suspension setups.

This versatility means:

  • Lowered setups: Adjustable range accommodates aggressive drops
  • Track to street: Tune for different driving scenarios

V2 Design: Built Better, Built to Last

The current V2 design represents AWR Racing’s commitment to continuous improvement. These end links come equipped with improved, sturdy, and smooth heim joint rod ends that make less noise and are built to last.

Whether you’re daily driving, road racing, or attacking autocross courses, these end links deliver consistent performance. They’re a must-have for any Miata enthusiast who takes their suspension setup seriously.

Premium Construction, No Compromises

AWR Racing builds these end links the same way they build everything else, with quality materials and attention to detail:

Rod Ends:

  • 3/8-24 heat treated chromoly construction
  • Hard chrome plated for durability and corrosion resistance
  • Injection molded for precision

Hardware & Components:

  • Zinc plated misalignment spacers
  • Grade 8 standard hardware (because your suspension deserves better than Grade 5)
  • Rubber O-rings to reduce noise and vibration

Body Construction:

  • Left and right hand aluminum hex tube body
  • Black anodized 6061 T6 aluminum
  • AWR logo etched

This isn’t just parts-bin assembly. Every component is chosen and customized to meet AWR’s standards, the same standards that have kept the family-owned San Diego shop running since 1995.

Application: NA/NB Miata (1990-2005)

These end links are specifically engineered for:

  • 1990-2005 Mazda Miata
  • NA generation (1990-1997)
  • NB generation (1999-2005)

If you’re running a first or second-generation Miata, these are your end links.

Why Adjustable End Links Matter

If you’re new to suspension tuning, you might wonder: why adjustable end links?

Here’s the reality: when you lower your Miata or change suspension components, your sway bar geometry changes. Stock end links can bind, create unwanted preload, or simply not fit properly. This affects handling, creates noise, and can even damage components.

Adjustable end links let you:

  • Eliminate binding in lowered setups
  • Fine-tune sway bar preload for different driving conditions
  • Maintain proper geometry regardless of ride height
  • Dial in handling balance between understeer and oversteer

It’s the kind of upgrade that makes everything else in your suspension work better.

SHOP NOW