Factory front control arms are remanufactured with needle bearings encased in aluminum, replacing the stock rubber bushings. Improves handling and steering accuracy. Grear for EP or ITS classes. Eliminates binding found in all others.
Click Buy Now to go to store. Left and Right sold separately
FRONT CAMBER CASTER PLATES
Allows for adjustment of front camber and caster on 2nd gen RX-7s. Supplied with bushings to allow the use of Bilstein P30 series or other aftermarket shocks with .560 inch shaft size, and also downsized .500 inch bushings for use with stock and some other aftermarket shocks.
Camber Plate Kit
FRONT STRUT TUBES
Seamless tubing, TIG welded spindle brackets, which are zinc plated, with sleeves and adjusters that are hard anodized black. Tubes are fabricated to match the stock tube dimensions using thick-walled tubing and mounting brackets, providing a much stronger strut., enabling it to take more abuse without bending or deforming. The tubes are threaded for easy fitment of Koni and Bilstein race cartridges (0000-04-7211-KN). Kit includes (2) fabricated strut tubes, (2) threaded sleeves, (2) lower spring perches. Springs and shocks are not included.
Click buy now to go to store. Then choose proper kit - One for ITS and Street applications and one for EP
2.25" REAR COIL-OVER HARDWARE KIT
Coil over hardware kit contains: (2) solid upper shock mounts with integral spring perch for 2.25" I.D. race springs, (2) threaded sleeves, (2) lower spring perches, and required hardware. Supplied with bushings to allow the use of Bilstein P30 series or other aftermarket shocks with .560 inch shaft size, and also downsized .500 inch bushings for use with stock and some other aftermarket shocks.
Buy Now
2.5" REAR COIL-OVER HARDWARE KIT
Coil over hardware kit contains: (2) solid upper shock mounts with integral spring perch for 2.5" I.D. race springs, (2) threaded sleeves, (2) lower spring perches, and required hardware. Supplied with bushings to allow the use of Bilstein P30 series or other aftermarket shocks with .560 inch shaft size, and also downsized .500 inch bushings for use with stock and some other aftermarket shocks.
Buy Now
REAR CONTROL ARM BEARING KIT
Spherical bearing and sleeve design, with bushings for outer rear pick up point. Replaces stock bushings. Comes with parts to do both sides.
Buy Now
REAR CONTROL ARM CAMBER ADJUSTER
One pair of independent locking adjuster to facilitate positive camber adjustments for each side of the rear suspension. Machined from billet aluminum and steel with serviceable bushings. adjusts rear camber from.5deg to 2.5 deg. a great addition to your stock or modified rx7 rear suspension.
Buy Now
URETHANE ENGINE MOUNTS
Urethane engine mounts give quicker shifting and improved throttle response, than stock mounts. Will fit vehicles with wet or dry sumps.
Buy Now
STRUT TOWER BAR - ADJUSTABLE
Adjustable tubular steel bar. Needed for cars that have been hit and might not be straight. Recommended for SCCA 'IT' class.
Buy Now
FRONT SPEEDWAY STYLE SWAY BAR - COMPLETE
Complete front sway bar assembly utilizing speedway style bars and AWR designed mounting system. P/N 01-401 CLASS EP
Buy Now
REAR ADJUSTABLE TOE LINK KIT
1986-91 RX-7 rear adjustable toe link set up. Adjuster rods made from 4130 chrome moly tubing with left and right hand rod ends for easy rear toe changes. Eliminates the rear radius rods. Requires modification (boring of factory tapered bores) to subframe and control arm (4 places) kit comes complete with all necessary hardware to install. A great addition along with our camber adjusters and outer bearing kit.
Buy Now
FRONT SWAY BAR ARMS
Replacement arms designed to work with AWR front sway bar. P/N 01-E402 CLASS EP/ITS
FRONT SWAY BAR MOUNTS
Needle bearing mounting blocks. Serviceable P/N 01-E403 CLASS EP/ITS
ADJUSTABLE SWAY BAR LINKS
3/8" Left and right rod ends with jamb nuts. Complete with mounting hardware. P/N 01-E404 CLASS EP/ITS
TIE RODS
Adjustable tie rods with 1/2" rod ends that fit our modified steering rack. Includes jamb nuts. P/N 01-E301 CLASS EP/ITS
STEERING COLUMN
RX-7 collapsible steering column utilizing stock car style couplings. P/N 01-E302 CLASS EP/ITS
ADJUSTABLE SPRING PERCH
Hard anodized 6061 aluminum to fit AWR designed strut tubes and adjusting nuts. P/N 01-E731 CLASS EP/ITS
ADJUSTER NUTS
Hard anodized 6061 aluminum with nylon tipped locking screws. P/N 01-E732 CLASS EP/ITS
FRONT BILSTEIN SHOCK INSERTS
Specially valved for AWR Racing programs. Non-adjustable. P/N 01-E73BL CLASS EP/ITS
ROLL CENTER BLOCKS
Eliminates roll center irregularities found when lowering vehicle. P/N 01-E370 CLASS EP/ITS
CAMBER / CASTER PLATES
Bolt in plates fro rapid camber and caster changes. Modifications to top structure preferred. P/N 01-E730 CLASS EP/ITS
REAR BILSTEIN SHOCKS
Specially valved for AWR Racing programs. Non-adjustable P/N 01-E83BL CLASS EP/ITS
