title bar for AWR racing, specializing in fabrication and design of high performance parts
AWR fabricates a 3/4" (19mm) rear sway bar the 1995-2003 Protege'. It has a wall thickness of .20". This part is available through MAZDASPEED Motorsports Development or directly through the AWR Store.

There is now a thicker, 7/8" (21.5mm) bar available with a wall thickness of .20", as well as a version for the MAZDASPEED Protege. These stiffer bar require stronger end links which are included.

click to go back to protege parts
These sway bar mount stand-offs are included.Sway Bar Stand Offmount stand off

19mm SWAY BAR KIT

These sway bar kits, which were originally produced for the 1999-2003 Protege, also fit the 1995-98 model Protege ES's with the 10.5" end links. This end link, Mazda part number LC62-34-170, available to racers through MAZDASPEED's Team Support program, or directly from Mazda dealers.

To fit on DX or LX Protege's, you'll need rear struts, either stock or aftermarket, for a Protege ES. The reason, is that the stock rear struts on the DX and LX, (and possibly other brands) do not have a tab to connect the sway bar end link to. This is only welded on the stock ES struts. If your aftermarket strut housings do have this tab, then the sway bar will fit your car too, with the proper end links.

These sway bar mount stand-offs are included.

19mm Sway bar kit
Buy Now Button
Installation instructions:

Quick info + end link info - 160kb

Step by step for 19mm only -320 kb

OPTIONAL END LINK KIT FOR 19mm SWAY BAR

We also make adjustable end link kits available for our 19mm rear sway bars, as well as kits for the front sway bars.

Click to go back to Protege parts
Rear adjustable end link kit for 19mm sway bar
Buy Now Button
Rear
Adjustable end links are also available for the front sway bars as well.
Buy Now Button
Front
click to go back to protege parts

Close up of end link clamp

21.5mm SWAY BAR KIT

There is also now a 7/8" (21.5mm) bar available with a wall thickness of .20". This stiffer bar requires stronger end links which are included.

7/8" (21.5mm) rear sway bar, with adjustable end links, for LX or EX Protege
Buy Now Button
LX or ES
Same as above, but for MAZDASPEED Protege.
Buy Now Button
MP3 & MS

click for close upsway end link close up


SpliceguysLogo