A version of these, modified for track use, were used in the Protégé' 5 pace car for Mazda Raceway at Laguna Seca and are available in a kit through AWR.

Includes all new AWR manufactured front strut housings, threaded collars and spring perches for front and back, Bilstein inserts, 275lb/10" (front) and 325lb/10" (rear)Eibach ERS race springs. Also included are upper adjustable front strut camber plates and rear upper strut mounts with spherical bearings, eliminating all rubber mounting.

0000-04-3300-KT

1999-2003 Protégé Front Camber Caster Plate

Adjustable front strut upper mounting plate allows for adjustment of camber and caster on 1999-2003 Protege.

AWR fabricates a 3/4" (19mm) 2 way adjustable rear sway bar the 1995-2003 Protégé. It has a wall thickness of .20". #0000-04-3302 and a fully adjustable version with stronger, adjustable end links, #0000-04-3302-FA.

These sway bar kits also fit the 1995-98 model Protégé ES's with the 10.5" end links. This end link, Mazda part number LC62-34-170, available to racers through MAZDASPEED's Team Support program, or directly from Mazda dealers. To fit on DX or LX Protégé's, you'll need rear struts, either stock or aftermarket, for a Protégé ES. The stock rear struts on the DX and LX, (and possibly other brands) do not have a tab to connect the sway bar end link to. This is only welded on the stock ES struts. If your aftermarket strut housings do have this tab, then the sway bar will fit your car too, with the proper end links.

The sway bar brackets shown below left, are included

21.5mm SWAY BARS 1995-2003 Protégé

There is also a 7/8" (21.5mm) fully adjustable bar available with a wall thickness of .20". This stiffer bar requires stronger end links which are included and are adjustable. This is available for any of the Protégé's, but there is a special one for MP3 and MAZDASPEED. #0000-04-3303

	21.5mm fully adjustable bar with adjustable end links
	21.5mm fully adjustable bar with adjustable end links specifically for MP3 and MAZDASPEED Protégé

We use Energy Suspension for all of our urethane components.

Adjustable End Links

AWR Makes a variety of Adjustable End Links in several different lengths, from 3.125" to 10.5" center to center. We can cover nearly any specialized application.

Modified (reinforced) stock front subframe - the brace running under the motor that picks up the front lower motor mount and bolts to the radiator support. A good addition for those who are experiencing motor movement and excess wheel hop in autocrossing or drag racing. Not recommended for street purpose. This is a modified stock unit, powder coated black.

	FRONT SUBFRAME REINFORCEMENT

ADJUSTABLE STRUT TOWER BRACE

We make adjustable front strut tower braces for 1995-2002 Protégé. We have them available with a polished, round aluminum tube, or out of carbon fiber. Both have threaded aluminum ends which connect to powder coated steel end plates.

	See all the styles!

FRONT UPPER STRUT MOUNTS 1995-2003 Protégé

AWR upper strut mount - adjustable, with 4130 spherical steel bearing and bushing design. Designed to add approximately 2.0 degrees of camber to stock or slightly modified suspension set ups.

	Front upper strut mounts (non adjustable)

REAR UPPER STRUT MOUNTS 1995-2003 Protégé

AWR upper strut mount - adjustable, with 4130 aluminum plate with spherical bearing, and integral upper spring perch.

	Rear adjustable upper strut mounts (stock shaft size)

BRAKE CALIPER BRACKETS

AWR manufactures new brake caliper brackets to retrofit alternate brake calipers to your Protégé, such as AP, Wilwood, etc. 7075. Black Anodized.

Front $137.50 a pair, 4 lug or 5 lug.

Rear $168.59 a pair, 4 lug

		Contact AWR to buy

Replacement trailing and lateral links for 1999-2002 Protégé. Made of 4130 with left and right tie rod ends.

Rear lateral link set. Fully adjustable to allow use of larger wheel and tire combo or add or decrease rear camber and toe settings.

Will fit with no modification to existing rear subframe or suspension hub. Available in steel powder coated or brushed aluminum finish. Not recommended for street application. A great addition for autocrossing and drag car applications.

Will fit all 99-2003 Protégés and may fit 1995-1998.

Installation instructions (trailing links only) 280kb

	Trailing Links
	Lateral Links

REAR TRAILING LINK BUSHINGS

Bushings required for installation of trailing arms.

		Contact AWR to buy

Highly modified stock units that have a spherical bearing and sleeve arrangement. A drag and road race item only, definitely not a street item. Sold separately and core is applicable. The outer pick up point utilizes a pin and collar set up [sold separately] that is variable and will alter camber gain and bump steer settings.

	Left Control Arm
	Right Control Arm