Competition 4.8 ring and pinion for Miata (0662-27-950A) goes one step further and is deburred and specially coated to improve strength and reliability. Reduces friction and operating temperature. Requires doubling of shims (over stock setup) to fit in stock case.)
COIL OVER HARDWARE KIT - 90-2005
Complete coil over hardware kit for use with Bilstein Shocks. Includes (4) threaded sleeves, (4) lower spring perches, (4) aluminum upper spring centering units, (4)rubber top spring pads, (4) shock adapters. Includes installation instructions. Used for Spec Miata class. Sold exclusively through MAZDASPEED MOTORSPORTS.
P/N 0000-04-5402-AW (MAZDA COMP)
REINFORCED STABILIZER BAR BRACKETS - 90-97
In racing and autocross use, especially when using larger sway bars and driving aggressively, the stock sway bar brackets can flex to the point of breaking. These reinforced brackets replace the stock ones to eliminate this problem. Spot welds attaching the stock mounts to frame must be drilled out. See Installation Instructions 152kb P/N 0000-04-5101-BK
REINFORCED STABILIZER BAR BRACKETS - 90-97
Open ended reinforced sway bar brackets allow the option of putting power steering hoses through the bracket. In racing and autocross use, especially when using larger sway bars and driving aggressively, the stock sway bar brackets can flex to the point of breaking. These reinforced brackets replace the stock ones to eliminate this problem. Spot welds attaching the stock mounts to frame must be drilled out.
REINFORCED STABILIZER BAR BRACKETS -90-97 Cadmium plated
In racing and autocross use, especially when using larger sway bars and driving aggressively, the stock sway bar brackets can flex to the point of breaking. These reinforced brackets replace the stock ones to eliminate this problem. Spot welds attaching the stock mounts to frame must be drilled out. These brackets are gold cadmium plated. 0000-04-5101-CD
REINFORCED FRONT SWAY BAR BRACKETS - 99-2003
1999-2003 MAZDA MIATA FRONT SWAY BAR BRACKETS. A SLIGHT MODIFICATION TO OUR EXISTING 5101 1990-97 FRONT SWAY BAR BRACKET TO GIVE A LITTLE MORE RADIATOR BRACKET CLEARANCE ON THE NEWER CARS. A GREAT PART, JUST LIKE THE ORIGINAL AWR SWAY BAR BRACKET KIT.
TOW HOOKS
AWR now makes tow hooks which are avaialable for the 1990-2005 Miata, as required by new SCCA rules which require 2" holes. Set includes one front and one rear tow hook. NOT RECOMMENDED FOR USE AS A TIE DOWN.