AWR Racing News

TRIANGULATED / 3 POINT FRONT UPPER STRUT BRACE Made from 1.00″ x .095 wall D.O.M. tubing and tig welded. Available powder coated in black or silver. Requires some modification to install. 2 x 10 mm holes must be drilled into firewall for installation. Cruise control pod in engine compartment must be slightly re-located. Fits all 1999-2003 Proteges, MS Proteges, P5 and MP3. Available to order now. Should be available in June.

Protege 3 Point Strut Tower Bar

Products, Protege, Suspension

AWR Camber Adjustable Rear Upper Control Arm for Miata

The title almost says it all.  AWR is proud to announce our New Rear Upper Control arms with eccentrics on the outer position for camber adjustability. These allow for camber to be adjusted in or out for different situations. Get rid of unwanted camber when lowering vehicle and running on slicks or increase camber when desired.

Control arms are sold in pairs and available 4 ways.

Bare arms with eccentrics, washers and nuts – no bushings.

Arms as above, but with the addition of 6 Mazda Competition 40% stiffer bushings.

Arms, eccentrics, bolts, washers and Delrin bushings for only the outer position on control arms (no inner bushings)

Arms, eccentrics, bolts, washers and Delrin bushings for all six positions, inner and outer for the control arm.

AWR is also able to supply matching bushings for the rest of your control arms in any style if required. Visit the Miata Suspension section of our store today to order your set. http://www.awrracing.com/store/index.php?cPath=3_8

Products, Suspension, miata

DG Motorsports - AWR RACING AWD MAZDASPEED3

DG MOTORSPORTS – AWR MAZDASPEED3

At first glance, the DG Motorsports AWD MAZDASPEED3 may look like the stereotypical SEMA show sport compact, but the truth lies hidden beneath. MAZDASPEED, DG Motorsports and AWR teamed up to build much more than the average tuner car.

David Green, owner and chief designer of DG Motorsports, felt that the awesome power potential of the MAZDASPEED3 could be seriously enhanced by all-wheel drive. Since David drives a MAZDASPEED6 every day, he knew the potential. With the genius of Tony Woodford at AWR, he transplanted the drive-train components from several Mazda platforms of the MAZDASPEED6 and CX-7 into the chassis of MAZDASPEED3. Read more…

Big Brake Kit, MAZDA3, MAZDASPEED3, New Parts, Suspension

We have posted some galleries of the new parts that will be used on the Spec MX-5 in the new for 2006 Mazda Spec MX-5 series.

The remote reservoir shocks and springs were developed by MAZDASPEED and Eibach, and sold through MAZDASPEED Motorsports Development. They are manufactured for MAZDASPEED by Eibach.

The door panel inserts are part of a larger fiberglass and aluminum interior panel package. This was developed by AWR and sold through MAZDASPEED Motorsports Development.

http://www.awrracing.com/specmx5/specparts.html

MX-5 Cup, Suspension