2009-2010 Mazda6 V6 AT Engine Mount
AWR is proud to announce the immediate availability of our first engine mount for the 2009-2010 Mazda6.
This mount fits V6 Automatic Transmission models and is the rear lower, dog-bone style mount.
It’s available in our normal assortment of durometers, 70, 88, and 95.
Coming soon will be the driver’s side engine mount.
Loading ...
what does it do ??
The whole point of our engine mounts with stiffer urethane bushings is to get the power to the wheels, rather than being wasted on twisting the engine in it’s mounts. It reduces driveline lash – that momentary whiplash when you step on the gas and there is a surge of power, and then a slight rocking as the engine first twists against the torque and then snaps back.
The cause is the soft rubber that manufacturers use in their mounts to dissipate the driveline vibration. Softer rubber means you’ll feel less vibration from the engine and shifts. The downside is that softer rubber allows the engine and trans to twist more when torque changes.
Using our AWR’s engine mounts with urethane bushings will result in a more direct application of power to the wheels. The torque isn’t wasted twisting the engine, but goes more quickly to the wheels. You will feel a bit more vibration that the stock mounts had masked, but most people that like to drive hard, prefer AWR’s mounts to the stock. We recommend the 70 durometer bushings for street cars, which is stiffer than a stock mount but not too harsh. The 88 and 95 durometers are respectively harder and recommended for racing applications.