TRIANGULATED / 3 POINT FRONT UPPER STRUT BRACE Made from 1.00″ x .095 wall D.O.M. tubing and tig welded. Available powder coated in black or silver. Requires some modification to install. 2 x 10 mm holes must be drilled into firewall for installation. Cruise control pod in engine compartment must be slightly re-located. Fits all 1999-2003 Proteges, MS Proteges, P5 and MP3. Available to order now. Should be available in June.
The title almost says it all. AWR is proud to announce our New Rear Upper Control arms with eccentrics on the outer position for camber adjustability. These allow for camber to be adjusted in or out for different situations. Get rid of unwanted camber when lowering vehicle and running on slicks or increase camber when desired.
Control arms are sold in pairs and available 4 ways.
Bare arms with eccentrics, washers and nuts – no bushings.
Arms as above, but with the addition of 6 Mazda Competition 40% stiffer bushings.
Arms, eccentrics, bolts, washers and Delrin bushings for only the outer position on control arms (no inner bushings)
Arms, eccentrics, bolts, washers and Delrin bushings for all six positions, inner and outer for the control arm.
AWR is also able to supply matching bushings for the rest of your control arms in any style if required. Visit the Miata Suspension section of our store today to order your set. http://www.awrracing.com/store/index.php?cPath=3_8
6Crew.com is announcing the launch of the Official National 6Crew Mazda6 Fest 2009 which will be held in Indianapolis, Indiana. At the 6Crew Mazda6 Fest, you can look forward to joining other Mazda6 owners on an oval track, a drag strip and a road course. In addition, over the multi-day event, there will be amusement and water parks as well as camping and/or hotel stays.
All information is posted at the 6Crew.com forum, at this address, http://www.6crew.com/forum/showthread.php?t=7540
SAN JUAN CAPISTRANO, Calif., April 28, 2009 — Robert Davis Racing (RDR) completed another successful NASA weekend, this time at Buttonwillow Raceway Park. The team took home seven (7) pole positions and five (5) class victories. In addition to the team wins, Jeff Jeppesen and Truman Pollard scored their first top-ten finishes of the year in the highly competitive Spec Miata class. It was also the first race since Truman’s #18 MX-5 Miata was completely rebuilt by his teammates as an “Overhaulin” surprise last week. The only disappointment was a Retirement and 6th place finish in the Saturday enduro race after the team led comfortably. Continue reading “NEW RDR CARS SHINE BRIGHT AND FLY”
REMINDER – THIS WEEKEND
Mark you calendars. AWR Racing will be attending MazFest 2009 on May 23rd, 2009 at California Speedway. See the DG MOTORSPORTS – AWR All Wheel Drive MAZDASPEED3 and the test car for the proposed Super Spec Miata.
AWR will also have a booth with products on hand for sale and we will be there to answer any questions you may have.
MazFest returns for its fifth year, a full day jam packed with Mazda love. Experience HPDE track time at the exciting and challenging Auto Club Speedway (aka Cal Speedway). We’ll be running the classic interior road course. This is your chance to satisfy your craving for speed: a fun, low traffic event with nearly two hours of track time! Instruction and class techniques are available for drivers of all levels.
When: May 23rd, all day (complete schedule)
What: Track Day, Car Show, Vendors and more.
Why: your car would hate you for missing this!
MORE INFO http://www.mazfest.com/
Now that it’s starting to get warmer in parts of the country, racers may have a harder time keeping their cars cool with a stock radiator. You won’t have that problem with an AWR Racing Competition Radiator.
Selected by MAZDASPEED Motorsports as their only racing radiator, you can be sure that you’ll be getting the best for your Mazda.
AWR starts with the finest radiator cores available, from Ron Davis Racing, to build it’s high performance and competition radiators for Mazda vehicles.
All AWR – Ron Davis radiators have these features:
- Race car performance and quality for your race car or street car.
- Completely constructed from aircraft quality 6061-T6 aluminum alloy.
- Fully tig welded fixture built for accuracy.
- No epoxy bonding
- Furnace brazed core.
- Exclusive multi louvered fin design for exceptional cooling.
- No need to run outlandish thick core radiator.
- CNC formed header tanks.
- Radiators are direct bolt in design that require no modification to any existing factory accessories or body work.
- Correct outlets and hardware bosses to accept factory fans and hoses.
- Race track and street proven.
- Pressure tested to 32 psi – far beyond actual cooling system safe operating pressures
SAN JUAN CAPISTRANO, Calif., March 30, 2009 — Robert Davis Racing (RDR) raced at their “home track”, Auto Club Speedway in Fontana, CA, in front of over 80 invited team quests and celebrated five wins and their first Spec Miata podium of the season, with Jeremy Barnes.
Continue reading “RDR ENJOYS HOME TRACK SUCCESS AND FIRST SPEC MIATA PODIUM OF THE SEASON”
Check out our MAZDASPEED3 AWD Video. See the story about this car with associated high res pictures.